Request Information
Reliable purity for high flow rates

F-series air compressor air filters with flanged connections have been specially designed for high air requirements. Their sturdy design and generously sized filter cases ensure a reliable stream of standard-compliant compressed air purity. They provide coverage for all purity classes as per ISO 8573-1 – with remarkably low pressure loss.
Unit of Measure

Specifications

Housing

 N/A F1410

Housing Type

 N/A Pressure Vessel with Full Access

Filter Grades

 N/A KA KB KC KD KE

Rated Flow

 N/A 5000 scfm

Connection Size

 N/A 8 in

Connection Type

 N/A Flange

Weight

 N/A 580 lb

Maximum Working Pressure

 N/A 232 psig

Maximum Operating Temperature

 N/A 140 ºF

Dimensions

Width

 N/A 31-1/2 in

Depth

 N/A 19.9 in

Height

 N/A 53.3 in

Pure Compressed Air for Every Application

Degree of Filtration

 N/A KA (Activated Carbon Filter Adsorption) KB (Coalescence Filter Basic) KBE (Extra Combination) KD (Particulate Filter Dust) KE (Coalescence Filter Extra) KEA (Carbon Combinatlor)

Initial Differential Pressure with Saturation (KB Degree of Filtration)

 N/A < 2 2 psi

Initial Differential Pressure with Saturation (KE Degree of Filtration)

 N/A < 3.0 psi

Initial Differential Pressure with Saturation (KD Degree of Filtration)

 N/A < 0.8 (New, dry) psi

Initial Differential Pressure with Saturation (KA Degree of Filtration)

 N/A 0.8 (New, dry) psi

Initial Differential Pressure with Saturation (KBE Degree of Filtration)

 N/A < 5.2 psi

Initial Differential Pressure with Saturation (KEA Degree of Filtration)

 N/A < 3.8 psi

Aerosol Content at Inlet (KB Degree of Filtration)

 N/A 10 mg/m³

Aerosol Content at Inlet (KE Degree of Filtration)

 N/A 10 mg/m³

Aerosol Content at Inlet (KBE Degree of Filtration)

 N/A 10 mg/m³

Aerosol Content at Inlet (KEA Degree of Filtration)

 N/A 10 mg/m³

Residual Aerosol Content at Outst According to ISO 12500-1 (KB Degree of Filtration)

 N/A < 0 01 mg/m³

Residual Aerosol Content at Outst According to ISO 12500-1 (KE Degree of Filtration)

 N/A < 0 01 mg/m³

Residual Aerosol Content at Outst According to ISO 12500-1 (KBADegree of Filtration)

 N/A < 0 01 mg/m³

Residual Aerosol Content at Outst According to ISO 12500-1 (KEA Degree of Filtration)

 N/A 0.003 (Total oil content) mg/m³

Filter Medium (KB Degree of Filtration)

 N/A Deep-pleated with support structure and polyester drainage fibre

Filter Medium (KE Degree of Filtration)

 N/A Deep-pleated with support structure and polyester drainage fibre

Filter Medium (KD Degree of Filtration)

 N/A Deeply pleated with supporting structure

Filter Medium (KA Degree of Filtration)

 N/A High-efficiency carbon fleece

Application (KB Degree of Filtration)

 N/A Filtration of solid and liquid aerosols and solid particles

Application (KE Degree of Filtration)

 N/A Same application as KB, but for higher compressed air quality; alternatively: micro-particle filter to KD degree of filtration

Application (KD Degree of Filtration)

 N/A Exclusively for the filtration of solid particles

Application (KA Degree of Filtration)

 N/A Exclusively for the removal of oil vapors

Application (KBE Degree of Filtration)

 N/A Combination of KB and KE; application as KE, but for higher assurance of compressed air quality

Application (KEA Degree of Filtration)

 N/A Combination of KE and KA, filtration of aerosols, solid matter particles and oil vapors

Advantages

Advantages

 N/A
  • Standard-compliant purity:
    The Kaeser Filter range uses modern deep-pleated filter media to remove particles and aerosols. A highly effective carbon fiber mat traps oil vapors. The impressive performance data of Kaeser Filter products have been determined in accordance with ISO 12500 and confirmed by the independent German "Institut für Energie- und Umwelttechnik e. V." (IUTA) testing agency.
  • Minimal pressure loss, maximum savings:
    Kaeser Filter products feature generously dimensioned housings and filter surfaces, innovative flow dynamics and high-performance filter media. They feature up to 50% lower pressure loss than other available filters – a value which remains virtually constant over the entire service life of the filter element. This means lower costs and CO2 emissions as well as reduced load on upstream compressors.
  • Service-friendly design, straightforward handling:
    Kaeser Filter products feature a corrosion-resistant steel housing and a stable filter element. Threaded rods and positioning guides ensure rapid element replacement and reliable sealing of filter elements. KB and KE coalescing filters are equipped as standard with the electronic, level-actuated ECO-DRAIN 31 F Vario condensate drain

Life Cycle Cost Savings

Life Cycle Cost Savings

 N/A Pressure loss is the most significant factor affecting the efficiency of compressed air filters. Kaeser Filter products feature generously sized housings and filter surfaces, innovative flow dynamics, and high-performance filter media. These features result in up to 50 % lower pressure loss in comparison to other typically available filters. Moreover, this outstanding filtration performance remains virtually constant throughout their entire service life. This reduces the load on upstream compressors, thereby offering the potential for significant reductions in costs and CO2 emissions.

Note

Note

 N/A Particulate, Liquid, and Oil Removal

Specifications are subject to change without notice.